Mitco

Mitco TM-20 Cad Cell Relay and Eye Tester E55-2M

The TM-20 enables the user to check, in minutes, both the cad cell relay and eye, without removing either from the burner.

• Checks all models of cad cell relays and cad cell eyes. Accurate and reliable. 
• High impact case.
•   Easy to follow, step-by-step directions.

Mitco CO2 Refill Package                                             

N28-17M: Replaces Bacharach# 11-7047. Includes
2 bottles of Clearview fluid, top gasket, screws and
envelope of filtering material.

Mitco Gas Pressure Tester

N28-75M: Tests both natural and LP gases. Range: 0-15” wc.

• Durable - service truck tough.
• Highlighted dial for fast reading.
• Calibrating screw.
• Swing-away cover holds instructions.

Mitco Kwik-Check II Pressure & Cuftoff Tester

P115-2M: Tests pump pressure and cutoff of fuel oil pumps quickly
and accurately without removing the pump from the oil burner.

• Can be used on all pumps with operating pressures up to 300 psi.
• Quick hook-up fittings make testing easy, clean and simple.
• Easy-to-follow step-by-step instructions
• Checks operating pressure and cutoff under actual operating conditions.
• Color coded hoses.
• All brass body
• High impact case.

Mitco Pump Test Gauges

2” face test gauge

• Large face makes reading easy at a distance or in dim lighting.
• Dial specifically designed for oil burner service.
• High impact acrylic bezel.
• 1/8” npt bottom mount.

Mitco Smoke Check Combustion Smoke Tester

N27-16M: An accurate and durable instrument for checking the smoke content of flue gases. Flue gas is drawn through the tester, staining the paper provided. This is compared to the smoke scale, also provided, enabling the serviceman to set the burner at maximum efficiency without guesswork.

• High impact barrel.
• Sampling tube curved to hook securely into smokepipe hole.
• Solid brass shaft.
• All hardware stainless steel.
• Lifetime lubrication.
• Fits standard Bacharach case.
• Fits all types of smokepaper.

Mitco TM-1 Transformer Tester

T389M: A durable, safe, easy-to-use ignition transformer tester.
Can be used without removing the transformer from the oil burner. The TM-1
will identify a transformer that has started to deteriorate, even though to the
eye it may appear to have an adequate spark.

• Easy-to-read meter.
• Fused for meter protection. 
• Safe. All tests made on primary side.
• For testing standard 10,000V
• High impact case. ignition transformers.

Mitco Pump Test Manifolds

All the features of the P115-2M Kwik-Check II and the P115M Oil Watcher in one tool. Also includes special fittings and instructions for testing Riello pumps. Use to test pump pressure and cutoff of fuel oil pumps quickly and accurately.

• No need to remove pump from oil burner. Can be used on all pumps
• with operating pressures up to 300 psi.
• Use with vacuum gauge to analyze problems in oil lines
• caused by impurities, leaks and high restrictions.
• Quick hook-up fittings for easy testing.
• Accurately checks pressure, cutoff and vacuum under actual operating conditions.
• Liquid filled gauges for accurate readings.
• High pressure hoses for setting up today’s higher pressure pumps.
• High impact case with handle.
• Complete with easy-to-follow instructions.
• Brass and high quality aluminum construction for long life.
• Color coded hoses for pressure hook-up.

Riello E55-4M Riello Flame Simulator

E55-4M just made priming your Riello pump easier. By simulating a flame, the burner is kept from going off on safety.

• Hands free operation.
• Quick and easy installation.
• Instructions included.
• Works best when used with the T400M Ignitor Tester

Riello T400M Ignitor Tester

Using the T400M is the best method of accurately, quickly and safely testing solid state electronic igniters.

• Works on all solid state oil igniters and Riello gas igniters.
• No disassembly of ignition system required.
• No exposure to high voltage connections.
• Solid state accuracy - no misleading meter reading or interpretation

Mitco Amp Mate Low Voltage Circuit Tester

E55-50M: Accurately measures low voltage control
circuits for precise heat anticipator adjustments
on thermostats.

• Quick hook-up makes testing easy and simple.
• High impact case for protection.
• Easy-to-follow, step-by-step instructions.
• Can be used to test other low voltage parts.

Mitco Electrical Testers

E53M: Line Voltage Tester.
Fully insulated, this handy pocket
screwdriver is also a combination
high voltage circuit tester. Checks
voltages from 90-250 volts.

E53-1M: Low Voltage Tester
Electrical tester for low voltage
testing. Checks voltages from 5-50
VAC/DC. Alligator clips on end of
test leads for convenience.

E397-244M: Continuity Tester
for Non-Energized Circuits.
This continuity tester instantly checks for continuity
of circuits in any component. Extra long
insulated lead with alligator clip for convenience.
Uses 2 standard ‘AA’ batteries (not included).

Mitco Blowout Guns and Accessories

Kwik-Purge II CO2 Blow Out Gun
For clearing plugged oil lines. Brass with built-in check valve.
Uses standard CO2 charges.
Kwik-Purge II Kit

P128-3M: Deluxe blow-out gun with gauge.Allows user
to identify if oil line plug is moving back to the tank.
Prevents waste of CO2 charges.
CO2 Charges

P128-1M: Box of 10 CO2 charges. High pressure CO2
charges for use in blow-out guns. Each one individually
immersion-tested to insure a leak-free charge.
Kwik-Purge III

P128-3AM: Deluxe blow-out gun with safety valve.
Valve opens @ 150 psi protecting against excessive
line pressure build-up.
Kwik-Coupling Kit

P128-4M: Kit contains (1) each coupling, 3/8”,
1/2” compression fittings, 3/8”, 1/2” flare fittings.
• Adapts to any standard CO2 blowout tool
• Threaded 1/4 npt
• Upgraded design reduces time required on
3/8” and 1/2” copper suction line hook-ups.

P128-34M: Blowout gun and fitting set.
Kit contains (1) each blowout gun, coupling, 3/8”, 1/2”
compression fittings, 3/8”, 1/2” flare fittings.

Mitco Vac Bolts
For use in popular filter cans.
• Accurate vacuum reading without disconnection of pump fittings or oil lines.
 

Mitco Vac Bolt Set
P127-34M: Contains one gauge and
four bolts to be used on most filter cans.

Mitco Punch Type Swaging Tool Set
T644-34M: Punch type swaging tool set contains 1/4”, 3/8”,
5/16”, 1/2” and 5/8” punches in plastic pouch.

Mitco Soot Saws
S5-49M Soot Saw: The perfect cleaning tool for removing soot
and scale build-up in boilers with narrow passageways.
• Made of cold rolled, electro-zinc coated, 17 gauge
steel for durability.
• Convenient to store and use.
• Soft vinyl handle for easy handling.
• Hanger hook for prominent pegboard display.

S5-50M Heavy-Duty Soot Saw: Designed to
remove soot in very clogged boilers.

Mitco Flaring Tools

Standard Flaring Tool (45°)
T644M: For use on soft copper, aluminum, and brass tubing.
• For 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” o.d. tubing.
• Hardened, highly polished, plated flaring bar. Self centering, slip on forged steel yoke.
• Nominal tube size: 1/8”, 1/4”, 3/8”, 1/2”.

Standard Flaring Tool and Cutting Tool Set
T644-10M: Kit contains # T644M standard flaring tool and
# T625-20M small tubing cutter.
• Comes in easy-to-carry blow molded plastic case.

Sliding Block Flaring Tool (45°)
T644-12M: For use on soft copper, aluminum, and brass tubing.
• For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” o.d. tubing.
• Flares and burnishes in one operation.
• Nominal tube size: 1/8”, 1/4”, 3/8”, 1/2”.

Self-Adjusting Flaring Tool (45°)
T644-13M: For use on soft copper, aluminum, and brass tubing.
• For 3/16”, to 5/8” o.d. tubing.
• Nominal tube size: 1/8” to 1/2”.

Swaging and Flaring Tool Kit (45°)
T644-26M: Quickly converts from flaring to swaging.
• For 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” and 3/4” o.d. tubing.
• Self centering slip-on forged steel yoke.
• Comes in easy-to-carry blow-molded plastic case.

Sid Harvey Vacuums

Sid Harvey vacuums clean equipment such as furnaces, boilers & ductwork.Picks up fine particle matter,cement dust & powder. Enclosed, disposable filter bag recovers more dirt than vacuums of equal size.

Sid Harvey Model S12 - 3 1/2 gallon vacuum 

 3.5G gal, 86"waterlift. 30' safety cord. Includes lined canvas hose, connector,bags,27"crevice tool, hose cage.

Sid Harvey Model S14 - 5 gallon vacuum 

5 gal, 3/4 bushel, cannister style, 1 HP air cooled, 86" waterlift, 30ft safety cord, rubber lined canvas hose, 27" metal crevice tool, hose cage, on wheeled casters.