Oil Tank Accessories

Sid Harvey Fuel Treatments

Sid Harvey’s STR-2+® Fuel Oil Conditioner for Home Heating Oil and Biofuel Blends up to B20

STR-2+® is engineered to combat the major fuel oil problems common in both the summer and winter seasons. Sid Harvey’s STR-2+® is the most cost effective maintenance conditioner that you can use to keep fuel systems running at peak efficiency.

STABILIZES FUEL - Sludge is formed as fuels degrades, breaks down and builds up, more so over the summer months. Over time the sludge builds up so much that you don’t realize that you have a problem until your filter clogs. Use STR-2+® to keep fuel stabilized throughout the year and to inhibit sludge from forming.

DISPERSES SLUDGE - STR-2+® breaks up and dissolves fuel sediment sludge into particles small enough to harmlessly pass through most filters and injectors, cleaning the entire fuel systems. This enable the fuel systems to operate at peak efficiency and leads to increased economy.

PREVENTS GELLING - STR-2+® lowers fuel pour point by up to 25'F. Cold Flow improvers modify wax crystals that form at temperatures below the cloud point, keeping them from forming an impervious mass of gelled fuel that could block flowing fuel.

PREVENTS ICE FORMATION - STR-2+® keeps any free water within the tank or any water absorbed by the fuel from freezing

EMULSIFIES WATER - Water is not only inherent in fuel oil, but it can be introduced at any point between the refinery and delivery. STR-2+® enables water and fuel to mix and emulsify with the fuel. This emulsification prevents algae growth and corrosion.

IMPROVES FUEL COMBUSTION AND EFFICIENCY - Combustion improvers in STR-2+® ignite fuel faster for a more complete burn. This results in increased BTU output, by as much as 5%, using the same amount of fuel. Carbon, soot build-up and emissions are reduced for even more efficiency.

   

 

Sid Harvey's BIOBORE® JF
Several years ago, Sid Harvey’s asked one of the world's leading chemical manufacturers to solve a HUGE problem facing the oil heat industry.  Create an easy to use product that helps eliminate the bacteria, microbes and sedimentation that accumulate in oil tanks. After extensive research and testing, they came back with BIOBOR JF.

BIOBOR JF is a microbiocide used to combat fungus and other microbes found in hydrocarbon fuels. It eliminates the growth of HUM-bugs (hydrocarbon utilizing micro-organisms) which causes fuel oil tank contamination, clog filters and lines and corrodes metal surfaces.  BIOBOR JF is dual action – kills present fungal growth and prevents future growth.

 

 

FPPF Specialty Fuel Treatments

 

Hot 4-in-1 Heating Oil Treatment

Totally disperses water and controls waxing and gelling. There is always water in fuel oil, but some people downplay the existence of water and the problems it can create. Oil pumped from a cold delivery truck's tank into a warm basement tank causes condensation. Also, water can enter a tank when it is being filled during a rain or snow storm. When water interfaces with fuel oil, algae is produced in the form of sludge. Water pulls the gum from the fuel oil which builds up on the burner parts as varnish. Filters are meant to get rid of dirt. That leaves the water for you to contend with.

 

Hot 4-in-1 Heating Oil Treatment
   

 

SBG Fuel Oil Sludge Remover

 SBG Fuel Oil Sludge Remover is formulated to eliminate sludge and water. SBG's specially formulated chemical base dissolves the sludge into a combustible substance in such a way as not to clog nozzles, while assuring clean filters and strainers.
 
SBG also helps to improve atomization and will provide a more efficient combustion.
Effective in #1, 2, 4, 5 and 6 fuels.

SBG Fuel Oil Sludge Remover

 

Oil Storage Solutions - Oil Tank Accessories

Tank Tub Double Wall Containment Tub  
 
Key Benefits:

  • UL Listed-Two piece construction made of space age Dura-Vinyl.
  • Meets & exceeds EPA requirements for 110% containment for both 275v and 330v oil tanks.
  • Meets & exceeds NFPA requirements for 110% containment for both 275 and 330v oil tanks.
  • Qualifies as a containment dike under NFPA 31  
  • Protect your tank from the elements including rain, snow and winter wind chill.
  • An attractive addition to any home.
  • Easy to install with new or existing oil tanks.  
  • Free standing design allows for quick and easy installation.
  • It has a 20 Year limited warranty

 

Tank Tub Double Wall Containment Tub

Tank Mate Custom Oil Tank Cover

 One piece construction made of space age Dura-Vinyl.  It has a UV protect ant to resist effects of sunlight and it is also resistant to all extreme temperatures.


Key Benefits

  • Protect your tank from the elements including rain, snow and winter wind chill.
  • An attractive addition to any home.
  • Easy to install with new or existing oil tanks.

 

Tank Mate Custom Oil Tank Cover

Tank Tray Containment Pans

Available in three sizes:

50 Gallon Tray For 275V & 330V Tanks,85” long  36” wide  4” high, Protects against filter leaks. Shown with 330V tank (includes 4 galvanized steel plates)

35 Gallon Tray for all 275 Gallon Oil Tanks, 60” long  33” wide  4” high (comes with 4 galvanized steel plates)

15 Gallon Tray that  installs in less than 30 Seconds.Place under tank and snap in the supplied clips, 74” long  15” wide  4”high

Tank Tray Containment Pans