Wayne Oil Burners
|
|
Wayne HS Series High Efficiency Oil Burner0.50 to 3.00 GPH, 120 Volt All models provide superior reliability and ultra high efficiency.They offer the features and application coverage you need,and are easy to install and service. Exclusive flow design provides forced air delivery at twice the normal pressure for more efficient combustion, application versatility and better venting capability, even in poor draft installations. The Flamelock retention head makes it possible to achieve the precise flame size, shape and position needed for maximum efficiency, and every component is a standard, “off-the-shelf” part. |
Wayne HS Series Specifications:
Capacity 0.50 GPH - 3.00 GPH (above 2.50 GPH requires optional Air Cone P/N 100531-001), No. 1 or No. 2 fuel oil.
Fuel Pump Compact size 3450 RPM, single or two stage. Universally serviceable or replaceable.
Controls Control mounting and wired, Cadmium Sulfide cell included.
Ignition 10,000 Volt, constant duty transformer, positive make or break contact with electrodes. Opens on top
for easy servicing and removal of gun assembly.
Motor Split phase, 1/7 Hp, 3450 RPM, 115 Volt NEMA standard.
Fan Housing One-piece die cast aluminum alloy, assures positive alignment of all moving components for life of unit.
Mounting Adjustable flange (standard w/fully assembled units) and/or Pedestal (optional).
Nozzle Adaptor “No drip” adaptor insures immediate oil cut-off. Eliminates smoke, soot or after-drip.
Air Tube 4" OD, available in standard lengths of 6", 9", 12", 15" & 18".
Air Cone Precision machined, cast iron construction. Perfect nozzle centering is assured.
Shipping Weight Approximately 36 lbs.
|
|
Wayne MSR&MSR-DC Oil Burners1.00 to 2.75 GPH, 12Volt MSR Features: MSR features specifically designed burners MSR-DC Features: A specially designed burner for No. 1 or No. 2 fuel oil |
Wayne MSR Specifications:
Capacity 0.50 thru 2.75 G.P.H., No. 1 or No. 2 fuel oil.
Fuel Pump Standard 3450 R.P.M. fuel pump-serviceable anywhere. One or two stage.
Controls Optional with cadmium sulphide cell and relay installed.
Ignition 10,000 V. constant duty transformer. TV-Radio interference proof. Positive make or break
contact with electrodes. Swing-away design swings open for easy access to gun assembly.
Motor NEMA Standard, 1/7 H.P. Split Phase 3450 R.P.M. 115 V, 60 HZ.
Fan Housing One piece, die cast aluminum which aligns all moving parts.
Mounting Adjustable flange or base mount.
Nozzle Adapter Patented no drip brass adapter insures sharp oil cutoff when fuel pump shuts off. Bleeds air
from line, prevents afterdrip, eliminating smoke, soot and carbon formation.
Air Adjustment Patented multiple air adjusting bands interlock for positive air adjustment.
Air Tube Heavy duty 13 gauge seamless material.
Flame Retention Head High temperature stainless steel for longer life.
50 HZ burners available Maximum firing rate reduced to 2.25 G.P.H. at 50 HZ operation.
Shipping Weight Approximately 35 LBS.
Wayne MSR-DC Specifications:
Capacity 0.50 thru 2.75 G.P.H., No. 1 or No. 2 fuel oil.
Fuel Pump Compact 3450 R.P.M. single stage 3 G.P.H. capacity.
Motor 12 VDC, permanent magnet, ball bearing with replaceable brushes, 4500 RPM, 12.5 full
load amps, .22 HP.
Ignitor 12 VDC, constant duty, solid state, mid point ground. Input-12 VDC, 50 VA, full load
amps 5.2. Output -20 KV peak, 28 MA.
Controls Ignitor drop-out timer available.
Oil Valve Non delay, 24 VAC/12 VDC, .6 Amp, fuel pump mounted.
Fan Housing One piece, die cast aluminum which aligns all moving parts.
Mounting Adjustable or fixed mounting flange.
Air Adjustment Patented multiple air adjusting bands interlock for positive air adjustment.
Air Tube Heavy duty 13 gauge seamless material, available in tube sizes from 3 3/4" to 15".
Flame Retention Head High temperature stainless
|
|
Wayne EH & FH Series Commercial Oil BurnerModel EH: Model FH: |
Wayne EH Series Specifications:
Capacity 3.00GPH thru 6.00GPH, No.1 or No.2 fuel oil .
Fuel Pump Standard 3450RPM fuel pump* easy to service. One or two stage.
Controls Standard 15 second control with cadmium cell installed.
Ignitor 10,000V constant duty transformer. TV -Radio interference proof. Positive make or break
contact with electrodes. Swing-away design swings open for easy access to gun assembly.
Motor 1/4 HP, NEMA Standard, Split Phase 3450RPM, 115V/60Hz.
Fan Housing One piece, die cast fan housing. High strength aluminum alloy maintains lifetime alignment of
moving parts. No vibration. Less wear. Insures whisper-quiet Operation.
Mounting Adjustable flange is standard on our 300 Series conversion Units; Pedestal mount available.
Nozzle Adapter Patented no drip brass adapter insures sharp quick oil cutoff when fuel pump shuts off. Automatically bleeds air from line. Prevents afterdrip, eliminating smoke, soot and carbon formation.
Air Adjustment Patented dual air adjusting bands interlock for positive air adjustment.
Air Tube Heavy duty 13 gauge seamless material.
Air Cone Heavy duty cast iron construction, easily changed for different firing rate ranges.
Serviceable Easy access to all parts permits quick inspection and cleaning. Entire burner is disassembled
in a few seconds without the need of special tools.
50hz Burner Available Maximum firing rate reduced to 5.00GPH at 50 Hz operation.
Shipping Weight Approximately 42 lbs.
