Ceramic Radiant Heaters
Space Ray DK Series Ceramic Infrared Radiant Gas Heaters
Features
|
 |
The DK Series is a line of 14 ceramic heaters in capacities from 30,000 to 160,000 Btu/hr, four in propane gas and ten in natural gas. Suitable for horizontal mounting or angled up to 35°, this series can meet a variety of spot and area heating requirements.
Space-Ray offers CSA design certified ceramic heaters in natural or propane gas, ranging in capacity from 26,000 to 160,000 Btu/hr, which gives us one of the most complete lines in the industry. The high intensity heaters have a porous ceramic emitter designed to operate in the 1600°F to 1800°F temperature range.
These units may be suspended hanging horizontally to direct the heat straight down or up to a 45° angle to direct the heat into a designated area. With the reflector options available, they may be mounted at a variety of mounting heights and angles for a wide selection of heating applications, including control options that allow for heater installation where no power supply is available. These units are suited primarily for spot and area heating.
With reflector options and a mounting capability from horizontal to 45°, these units are very flexible. The option of a 24-volt direct spark ignition system or having a millivolt control system allows these units to be used where no power supply is available.
Space Ray RSCA Series Ceramic Infrared Radiant Gas Heater
|
Features
|
|
The RSCA Series is the highest quality ceramic infrared heater in the industry. Available in natural or propane gas in 26,000, 52,000 or 104,000 Btu/hr, it features iron oxide coated tiles that increase surface emissitivity by 13%, plus an internal plenum assembly and an Incoloy 800 Reverberatory Screen, which provides a secondary radiating surface and additional safety.
Space-Ray offers CSA design certified ceramic heaters in natural or propane gas, ranging in capacity from 26,000 to 160,000 Btu/hr, which gives us one of the most complete lines in the industry. The high intensity heaters have a porous ceramic emitter designed to operate in the 1600°F to 1800°F temperature range.
These units may be suspended hanging horizontally to direct the heat straight down or up to a 45° angle to direct the heat into a designated area. With the reflector options available, they may be mounted at a variety of mounting heights and angles for a wide selection of heating applications, including control options that allow for heater installation where no power supply is available. These units are suited primarily for spot and area heating.
With reflector options and a mounting capability from horizontal to 45°, these units are very flexible. The option of a 24-volt direct spark ignition system or having a millivolt control system allows these units to be used where no power supply is available.
